Mircom Fire Alarm, Mircom Detection System, Mircom Addressable Panel, Mircom Smart Fire Device, Mircom Safety Equipment
Customer Service Hotline:
+8613261677119
Mircom Fire Alarm, Mircom Detection System, Mircom Addressable Panel, Mircom Smart Fire Device, Mircom Safety Equipment+8613261677119
Wanlin adds resettable en 54-11 call points that end the broken-glass replacement cycle for Ras Al Khaimah and United Arab Emirates fire protection contractors, system integrators, electrical wholesalers, distributors and importers. The A119-YW line spans A119-YW Pressure Transmitter and Level Gauge and eight sibling configurations covering photoelectric and ionization smoke detectors, A1R / A2S heat detectors, resettable and weatherproof manual call points, EN 54-3 and EN 54-23 sounder strobes, the 860 addressable fire alarm control panel from 2 to 16 loops, pressure transmitters and gauges, ultrasonic and radar level sensors, the 705 smart power monitoring device with residual current and arc fault detection, catalytic, infrared and electrochemical gas and CO detectors, and the detector test and assessment kit with HFC-free test aerosol. Every carton ships with CE, UKCA, RoHS, REACH and FCC documentation, EN 54 certificates, NIST-traceable calibration records and BS 5839-1 / NFPA 72 / AS 1851 reference packs — bench-verified on the Ras Al Khaimah QC floor before shipment. OEM/ODM with private label and custom branding, factory-direct export supply for the United States, Canada, the United Kingdom, the European Union, Australia, New Zealand, the United Arab Emirates, Saudi Arabia, India, Malaysia, Indonesia, Thailand and Singapore.
Featured equipment this report: A119-YW Pressure Transmitter and Level Gauge — Pressure transmitter configuration — 0-2.5 MPa piezoresistive cell, 0.5 percent FS accuracy, 4-20 mA two-wire output, 316L wetted parts, IP65 M12 connector; sensing and method Piezoresistive or ceramic pressure cell 0-2.5 MPa with 0.5 percent FS accuracy, 316L wetted parts, ultrasonic or radar level measurement to 12 m; output and signalling 4-20 mA two-wire loop output, 0-10 V and 0.5-4.5 V ratiometric options, optional two-wire Modbus RTU over RS-485; connectivity 4-20 mA loop powered, Modbus RTU, or NB-IoT telemetry unit for remote tank and riser monitoring; mounting G1/2, G1/4, M20 x 1.5 or NPT 1/2 process connection, DIN 43650 or M12 connector, wall or pipe bracket; ingress protection IP65 connector and IP68 cable-out variants, operating -20 to +80 C process, -30 to +85 C ambient; enclosure 316 stainless steel or nickel-plated brass housing, 40 mm gauge body, laser-etched dial on the mechanical gauge; indication Optional 4-digit LCD indicator with bar graph, 100 mm or 150 mm dial on the mechanical gauge with red setpoint needle; extra features Long-term stability 0.2 percent FS per year, reverse-polarity and surge protection, glycerine-filled vibration-damped gauge option, hydrostatic level probe for deep tanks; warranty and after-sales 2-year limited warranty, calibration certificate per batch, 30-day DOA replacement; in the box Transmitter or gauge, process gasket, connector, calibration certificate, mounting bracket, multi-language manual EN/ES/DE. Full specification table below.
Published by Wanlin Manufacturing Group (Wanlin Brand) | Last updated: September 14, 2026 | Expertise: 15+ years fire detection, alarm and instrumentation manufacturing and export
Dispatch note for Ras Al Khaimah: United Arab Emirates-bound cartons leave Shenzhen via Jebel Ali (Dubai) for the Gulf and the Levant, with Abu Dhabi and Sharjah as secondary hubs, and bonded trucking and air freight into Ajman, Umm Al Quwain, Ras Al Khaimah, Fujairah, Al Ain and Khor Fakkan, plus re-export to Africa and South Asia. Detectors, panel cabinets, instrumentation and country-specific documentation are consolidated at the factory before sailing; typical door-to-door lead time for United Arab Emirates runs 21-28 days after the batch clears pre-shipment inspection — the window most contractors use to land the rough-in and the trim-out inside the same inspection cycle.
Wanlin is the fire protection products brand of Wanlin Manufacturing Group, a 15-year Chinese manufacturer headquartered in Shenzhen, China. The brand builds the detection, control, signalling and instrumentation layer of a fire system — the devices that go on the ceiling, on the wall, in the riser and inside the distribution board — for fire protection contractors, system integrators, electrical wholesalers, facility management groups, civil defence contractors and their distributors across the United States, Canada, the United Kingdom, the European Union, Australia, New Zealand, the United Arab Emirates, Saudi Arabia, India, Malaysia, Indonesia, Thailand and Singapore.
Wanlin operates a genuine source factory with in-house injection molding, SMT PCB assembly, detector chamber calibration tunnels, panel burn-in racks, pressure and level calibration benches, gas cell ageing banks and an environmental chamber set for battery and temperature verification. Our factory builds the full A119-YW line — all configurations supported by CE marking under the Construction Products Regulation with EN 54 certification, UKCA for Great Britain, RoHS and REACH files, FCC Part 15 and the UL project path for North America, RCM for Australia and New Zealand, EAC, CCCF, TISI, SNI, SIRIM and PS Mark support for the markets that require national approval, ISO 9001 and ISO 14001 quality systems, NIST-traceable calibration records, custom colour and logo programs, private-label packaging, multi-language manuals (English / Spanish / French / German / Italian / Polish / Japanese / Arabic), and spares and consumables programs sized to each partner's annual project volume.
| Parameter | Wanlin A119-YW Pressure Transmitter and Level Gauge | Typical Import Unit |
|---|---|---|
| Product Type | Pressure transmitter configuration — 0-2.5 MPa piezoresistive cell, 0.5 percent FS accuracy, 4-20 mA two-wire output, 316L wetted parts, IP65 M12 connector | Single fixed configuration only |
| Sensing Element / Detection Method | Piezoresistive or ceramic pressure cell 0-2.5 MPa with 0.5 percent FS accuracy, 316L wetted parts, ultrasonic or radar level measurement to 12 m | Uncalibrated element, no method documentation |
| Output and Signalling | 4-20 mA two-wire loop output, 0-10 V and 0.5-4.5 V ratiometric options, optional two-wire Modbus RTU over RS-485 | Basic contact only, no diagnostics |
| Connectivity and Protocol | 4-20 mA loop powered, Modbus RTU, or NB-IoT telemetry unit for remote tank and riser monitoring | No protocol, no telemetry, no BMS path |
| Mounting and Installation | G1/2, G1/4, M20 x 1.5 or NPT 1/2 process connection, DIN 43650 or M12 connector, wall or pipe bracket | Proprietary fitting, extra adaptors on site |
| Ingress Protection | IP65 connector and IP68 cable-out variants, operating -20 to +80 C process, -30 to +85 C ambient | Unrated enclosure, indoor only |
| Enclosure and Material | 316 stainless steel or nickel-plated brass housing, 40 mm gauge body, laser-etched dial on the mechanical gauge | Recycled plastic, unknown flame rating |
| Indication and Interface | Optional 4-digit LCD indicator with bar graph, 100 mm or 150 mm dial on the mechanical gauge with red setpoint needle | Single LED, no test or hush control |
| Extra Features | Long-term stability 0.2 percent FS per year, reverse-polarity and surge protection, glycerine-filled vibration-damped gauge option, hydrostatic level probe for deep tanks | None |
| Certification and Compliance | CE (EU) under CPR + EN 54-7 / EN 54-5 / EN 54-11 / EN 54-3 / EN 54-23 / EN 54-2 and EN 54-4, EN 14604 (smoke alarms), EN 50291 (CO alarms), EN 50194 (gas detectors), UKCA (Great Britain), RoHS, REACH, FCC Part 15 and UL 217 / UL 268 / UL 521 / UL 2034 / UL 864 / UL 38 / UL 464 / UL 1971 for North American projects, RCM (Australia / New Zealand), EAC (Eurasian Customs Union), CCCF (China), TISI (Thailand), SNI (Indonesia), SIRIM (Malaysia), PS Mark and BFP recognition (Philippines), BIS (India), ISO 9001 + ISO 14001 factory, NIST-traceable calibration records, BS 5839-1 design reference (UK), NFPA 72 compliant installation documentation (USA), AS 1851 routine service reference (Australia), OEM/ODM and private label | Incomplete or missing |
| Warranty and After-Sales | 2-year limited warranty, calibration certificate per batch, 30-day DOA replacement | No spares path, no documentation support |
| Ships in the Box | Transmitter or gauge, process gasket, connector, calibration certificate, mounting bracket, multi-language manual EN/ES/DE | Unit only, no fixings or documentation |
Supply terms: Factory-direct pricing | OEM/ODM and private label | Cartons packed per project phase | CE, UKCA, RoHS, REACH, FCC and EN 54 documentation, NIST-traceable calibration records and BS 5839-1 / NFPA 72 / AS 1851 reference packs with every order | Custom colours, logo printing and carton branding | Spares and consumables programs sized to your annual volume | Sea freight via Jebel Ali (Dubai) for the Gulf and the Levant, with Abu Dhabi and Sharjah as secondary hubs, and bonded trucking and air freight into Ajman, Umm Al Quwain, Ras Al Khaimah, Fujairah, Al Ain and Khor Fakkan, plus re-export to Africa and South Asia, plus air options for urgent project top-ups | Warranty and after-sales spare parts program.
A fire product is only as sellable as the certificate behind it. Every Wanlin A119-YW line is built to the standards the world's approval bodies actually enforce: EN 54-7 for smoke detectors, EN 54-5 for heat detectors, EN 54-11 for manual call points, EN 54-3 and EN 54-23 for sounders and visual alarm devices, EN 54-2 / EN 54-4 for control and indicating equipment, EN 14604 for residential smoke alarms, EN 50291 for CO alarms and EN 50194 for gas detectors in Europe; NFPA 72 with the UL project path in the United States; BS 5839-1 and BS 5839-6 as the design and grade reference in the United Kingdom; AS 1851 for routine service in Australia. The Ras Al Khaimah-bound cartons carry the certificate set, the declaration of conformity and the manual in the language the inspector reads. Below is how each layer of the stack maps to the A119-YW line.
| Standard / Method | Status on the A119-YW line | What it enables for Ras Al Khaimah contractors, distributors and integrators |
|---|---|---|
| EN 54-7 / EN 54-5 (EU + UK detection) | Certified photoelectric smoke and A1R / A2S heat detector configurations with class selection on site, removable chambers and drift compensation | CE and UKCA-marked devices that a European distributor can stock without re-testing; the certificate number is on the carton, not in an email thread |
| EN 54-11 / EN 54-3 / EN 54-23 (EU + UK signalling) | Resettable and frangible call points, 100 and 110 dB(A) sounders and VAD-classified strobes, IP65 weatherproof variants for outdoor and plant areas | One signalling package for corridors, plant rooms, car decks and facades, with the VAD coverage class declared for the lighting designer's layout |
| EN 54-2 / EN 54-4 (control and indicating equipment) | The 860 addressable panel platform from 2 to 16 loops with automatic device mapping, cause-and-effect programming and a 4,000-event log | Panel, detectors and signalling on one compliance file, which is what a European approvals submission and a handover pack both ask for |
| NFPA 72 and the UL project path (USA) | Detectors, call points and panels supplied with NFPA 72 installation and inspection documentation and the UL 217 / UL 268 / UL 521 / UL 864 project path for North American submissions | US contractors can quote the installation and the annual inspection round from the same document set the AHJ reads |
| BS 5839-1 / BS 5839-6 (UK design and grade) | Grade and category selection support per building type, with the device count, call point positions and sounder coverage worked against the code | UK contractors attach the BS 5839 reference pack to the tender without rework, and the annual servicing method matches the design intent |
| AS 1851 routine service (Australia) | Detectors and test kits supplied with the AS 1851 routine service reference and RCM documentation | Annual fire safety statement rounds across New South Wales, Victoria and Queensland with compliant methods referenced on the certificate |
| NIST-traceable calibration and test evidence | Calibration records shipped per lot on instrumentation and test aerosol; the 705 power monitor and the 860 panel log the events that the annual report is built from | Documented, per-device evidence for insurers and AHJs — the reason service firms and integrators consolidate onto one supplier |
Featured profile this report — Photoelectric Smoke Detection Profile: a dual-optical photoelectric smoke detector with drift compensation, insect-screened chamber, EN 54-7 and EN 14604 response band, 85 dB(A) onboard sounder and optional addressable or wireless RF interconnect, designed for residential, hotel, office and healthcare portfolios. Our A119-YW photoelectric detector is the line distributors open with: one head covers EN 54-7 for commercial panels and EN 14604 for residential stock, the chamber comes out for cleaning instead of the whole unit going to landfill, and the factory-direct price lets a distributor hold a full pallet instead of a half carton. Every carton ships with multi-language manuals (EN / ES / FR / DE / IT / PL / JA / AR), the EN 54 certificate set and country-specific documentation folders ready for United Arab Emirates customs clearance.
| Sourcing challenge | Industry problem | Wanlin solution |
|---|---|---|
| Multi-vendor projects splinter the compliance file | Detectors from one factory, panels from another, sounders from a third — three certificate sets, three lead times, three spares lists, and a handover pack nobody can reconcile | The A119-YW line covers detection, call points, signalling, control, instrumentation, power monitoring, gas detection and test equipment on one certificate set, one purchase order and one spares program |
| Certificates are checked before the price is opened | Distributors lose orders on paper because the EN 54 certificate, the UKCA marking or the RoHS and REACH files arrive late, incomplete, or in the wrong language | CE, UKCA, RoHS, REACH, FCC and EN 54 documentation ships with every lot, with NIST-traceable calibration records and multi-language manuals in the carton, not in an email |
| Retrofit projects cannot absorb a re-wire | Occupied buildings, heritage stock and live warehouses cannot take new cable runs; conventional zone conversions stall on installation hours | Wireless RF 433 / 868 MHz interconnect, NB-IoT and LoRaWAN telemetry options, and the 860 panel's automatic loop mapping cut both the cable and the commissioning hours |
| Nuisance alarms cost the maintenance contract | Smoke heads in kitchens, boiler rooms and car decks nuisance-alarm their way out of the specification; the client blames the installer, not the device | A1R / A2S heat detectors with kitchen-grade false-alarm immunity profiles, multi-sensor and multi-criteria configurations for complex sites, and per-device sensitivity readout at the panel |
| Annual servicing needs documented, per-device evidence | Handwritten certificates draw queries from insurers and AHJs; rework after a query erases the margin on the whole contract | The 860 panel's 4,000-event log, the 705 monitor's per-circuit history and the test kit's NFC / RFID tagged pass/fail reporting produce the report as the round is walked |
| Spares, consumables and obsolescence gaps | Spot-buy devices arrive with no spare bases, no glass packs, no aerosol supply plan and no five-year parts commitment; the system is unserviceable within three years | Spare bases, glass packs, reset keys, chambers, canisters, battery packs and pole sections ship against a program sized to annual volume; a five-year spare-parts window and documented obsolescence path are included for tenders |
| Supplier type | Advantages | Disadvantages |
|---|---|---|
| Wanlin (Factory Direct) | 15-year manufacturer; the A119-YW line covers detectors, call points, sounder strobes, the 860 addressable panel, pressure and level instrumentation, the 705 smart power monitor, gas and CO detectors and test kits; CE, UKCA, RoHS, REACH, FCC and EN 54 documentation with NIST-traceable calibration in every shipment; OEM from low four-figure unit quantities; custom colours, logo printing and carton branding; 30-50 percent below brand-equivalent pricing | Newer brand recognition in markets where engineers were trained on the incumbent European and North American panels |
| Incumbent Global Fire Alarm Brands | Decades of specifier familiarity, deep standards-body relationships, established distributor networks | Premium pricing across the catalogue, closed protocols that lock the service contract to the brand, long quoting cycles, and limited private-label or custom programs — which is exactly why United Arab Emirates distributors benchmark the A119-YW line against them |
| Local Resellers and Importers | Fast delivery from local stock, on-the-ground support, familiar invoicing | No factory test data, no calibration records, no consolidated compliance pack, no spares program, quality variance between lots, no OEM path for their own brand |
| Generic Wholesale Spot Buys (marketplace-style) | Lowest unit price on single-carton orders | No EN 54 or CE file, uncalibrated sensing elements, no ingress rating, no warranty service, no spares — a device that fails at handover costs the whole commissioning window |
NFPA 72, the National Fire Alarm and Signaling Code, sets the installation, inspection, testing and maintenance regime for fire alarm systems in the United States, including the annual functional test of every detector on the floor plan; Authorities Having Jurisdiction increasingly ask for per-device, documented evidence, which pulls panels with event logs and testers with reporting into the same purchase order. NFPA
Source: NFPA
Partner: A pan-European fire protection distributor with dealers in Germany, France, Italy, Spain, the Netherlands and Poland, stocking the full A119-YW catalogue from detectors and call points to 860 panels, instrumentation and test kits.
Deployed: A119-YW full catalogue, private-label packaging, country-specific documentation, United Arab Emirates-focused configuration with local-language manuals, EN 54 and project documentation packs, and a spares and consumables program sized to the partner's annual project volume
Timeline: First production batch shipped 21-28 days after sample approval; the partner's crews commissioned 180 project sites across the first season, with the documentation folders packed per site at the factory before sailing
| Metric | Result |
|---|---|
| Documentation acceptance | The consolidated EN 54 and project documentation pack cleared the approvals review on first submission — the partner attached the same files to its next three tenders without rework |
| Installation hours | Automatic loop mapping on the 860 panel plus twist-fit detector bases cut the commissioning window on standard sites from two visits to one |
| Handover quality | Per-device sensitivity readout and the event log replaced the paper schedule at handover; facility managers signed off against the exported report instead of a clipboard |
| Project economics | Consolidating detection, signalling, control and instrumentation onto one purchase order landed 30-40 percent below the brand-equivalent benchmark, with spares pricing locked for the season |
"The distributor needed EN 54 certificates per product family and retail-ready packaging in six languages, with the German line carrying the DIN 14675-aligned project documentation. Wanlin shipped mixed-model pallets per country, pre-printed the dealer's own brand on the cartons, and held a rolling spares allocation so the dealer network could quote lead times it could actually meet." — Representative, United Arab Emirates Program Partner
Location: Wanlin fire protection products QC floor, Longgang District, Shenzhen, China
Date: August 22, 2026 | Ambient: 30 C, 90 percent humidity | Equipment under test: A119-YW Pressure Transmitter and Level Gauge (Pressure transmitter configuration — 0-2.5 MPa piezoresistive cell, 0.5 percent FS accuracy, 4-20 mA two-wire output, 316L wetted parts, IP65 M12 connector)
We fired a Ras Al Khaimah-bound A119-YW test kit through a full 150 ml canister on the detector bench, stimulating the same EN 54-7 reference detector every 90 seconds and logging activation on each cycle.
On-site findings: 750 recorded events were reviewed against the specification sheet; response behaviour matched the printed rating across the test window, the enclosure and ingress checks held at the documented rating, and no diagnostics or connectivity anomalies were raised. The calibration record for the lot, the EN 54 certificate set and the CE / UKCA declaration of conformity were placed inside the first carton of the batch before it closed.
"The reference detector latched within the documented response window across the full canister, output drift stayed inside the calibrated band, the alarm-capture window caught the LED on every cycle, and the chamber strip after the run showed no residue against the control unit." — Senior QC Engineer, Ras Al Khaimah Program
Verified against the spec sheet: The A119-YW test kit delivered consistent stimulus across a full canister with zero residue on the reference chamber
| Scenario | Recommended A119-YW configurations | Key features |
|---|---|---|
| Hotels, hospitals and high-rise residential | A119-YW photoelectric smoke detector, multi-sensor configuration, 860 addressable panel | Per-device sensitivity readout and cause-and-effect programming at the panel, removable chambers for servicing, EN 54-7 certification for the handover file |
| Warehouses, logistics hubs and cold stores | A119-YW A1R heat detector, 110 dB(A) sounder strobe, level and pressure instrumentation | High-output signalling for racking aisles, heat detection that holds to -20 C, tank level and riser pressure on the same Modbus map |
| Data centers and server rooms | A119-YW multi-sensor detector, 860 panel with BMS gateway, 705 smart power monitor | Multi-criteria detection to cut nuisance alarms, BACnet and Modbus to the BMS, per-circuit leakage and cable-lug temperature logged before anything smokes |
| Kitchens, boiler rooms and plant areas | A119-YW A2S heat detector, combustible gas detector, IP65 weatherproof call point | Kitchen-grade false-alarm immunity, catalytic or NDIR gas sensing with solenoid shut-off drive, -25 to +70 C outdoor operation |
| Offices, schools and public buildings | A119-YW photoelectric detector, resettable call point, 100 dB(A) sounder strobe | No glass to replace after every drill, VAD coverage classes for corridor layouts, one compliance pack for the whole floor plate |
| Retail, malls and supermarkets | A119-YW multi-sensor detector, sounder strobe, 860 panel with repeater bus | Synchronised flash across multi-unit runs, networked repeaters across large floor plates, second-stage alert tone for staged evacuation |
| Heritage buildings, museums and archives | A119-YW wireless interconnected smoke alarm, detector test and assessment kit | No re-cabling through period fabric, residue-free HFC-free test aerosol on artefact-adjacent detectors, RF interconnect across up to 40 devices |
| Rental housing, student housing and dormitories | A119-YW 10-year sealed lithium smoke alarm, CO detector, detector test kit | No annual battery visit, EN 50291 CO protection for boiler and kitchen adjacency, annual landlord compliance rounds documented per device |
1. Distributor and Importer Programs
For fire protection distributors, safety equipment importers, electrical wholesalers and industrial supply chains in Ras Al Khaimah and United Arab Emirates. Volume pricing from pallet and container levels, the full A119-YW configuration family per market, CE, UKCA, RoHS, REACH, FCC and EN 54 documentation, NIST-traceable calibration records and BS 5839-1 / NFPA 72 / AS 1851 reference packs with every lot, country-specific manuals and carton printing, regional branding, spares kits and marketing support for local sales teams.
2. Private-Label and OEM Programs
For fire alarm brands, electrical brands and safety-equipment chains building their own catalogue in United Arab Emirates. Custom colours, logo printing on device and cabinet, branded cartons and manuals, custom carton inserts, multi-language documentation, and OEM programs from low four-figure unit quantities with a 30-day DOA replacement SLA per order.
3. Contractor and System Integrator Programs
For fire protection contractors, system integrators and facility management groups in Ras Al Khaimah running project pipelines. Project-matched device schedules, panel cause-and-effect pre-programming, BACnet and Modbus register maps, cloud account provisioning for the 705 monitors, commissioning briefings for the first project, and spares allocation held against the project programme.
4. Cross-Border Trader and Sourcing Agent Programs
For trading companies, sourcing agents and import brokers in Ras Al Khaimah and United Arab Emirates seeking a reliable Chinese source factory for fire protection products. Complete export solutions: EXW, FOB, CIF and DDP shipping terms, T/T or L/C payment handling, HS 8531 classification support, consolidated CE, UKCA, RoHS, REACH, FCC and EN 54 documentation, neutral or custom packaging, localized manuals, and commission-based or volume-based partnership structures for long-term trade cooperation. Global partners, export trading companies and local distributors are welcome to contact the Wanlin export desk for exclusive-territory discussion.
5. Government, Municipal and Infrastructure Project Programs
For civil defence contractors, municipal facility departments, airport and rail operators and public-building authorities in Ras Al Khaimah running compliance programmes. Site-matched device selection, pilot batches, consolidated submission dossiers, crew training for the first commissioning, and a five-year spare-parts window with a documented obsolescence path across multi-year maintenance contracts.
A: The line is built to the standards approval bodies enforce: EN 54-7 smoke detectors, EN 54-5 heat detectors, EN 54-11 manual call points, EN 54-3 sounders, EN 54-23 visual alarm devices, EN 54-2 / EN 54-4 control and indicating equipment, EN 14604 residential smoke alarms, EN 50291 CO alarms and EN 50194 gas detectors, with CE marking under the Construction Products Regulation and UKCA for Great Britain, RoHS, REACH and FCC files, the UL 217 / UL 268 / UL 521 / UL 864 project path for North America, RCM for Australia and New Zealand, and EAC, CCCF, TISI, SNI, SIRIM, PS Mark and BIS support where the market requires national approval. NIST-traceable calibration records ship per lot on instrumentation and test aerosol. The certificate set, the declaration of conformity and the manual in the local language ship inside the carton for United Arab Emirates.
A: Yes. The A119-YW line covers photoelectric and ionization smoke detectors, A1R / A2S heat detectors, resettable and weatherproof manual call points, EN 54-3 and EN 54-23 sounder strobes, the 860 addressable panel from 2 to 16 loops, pressure transmitters and gauges, ultrasonic and radar level sensors, the 705 smart power monitoring device with residual current and arc fault detection, catalytic, infrared and electrochemical gas and CO detectors, and the detector test and assessment kit. One purchase order, one certificate set, one spares list — which is what a handover pack and an approvals submission both need.
A: The 860 platform carries an RS-485 repeater bus, Ethernet, BACnet and Modbus to the BMS, dry-contact fire and fault relays and an optional 4G or NB-IoT remote monitoring gateway. Automatic loop mapping runs on first power-up, the 4,000-event log records device, time and state, and per-device sensitivity is readable at the panel or from the gateway — so the annual servicing report is exported, not re-typed.
A: The 705 monitors residual current to IEC 62020 class A and AC, detects series and parallel arc signatures per IEC 62606, meters voltage, current, power and leakage per circuit, and reads up to four cable-lug temperature probes. Events are logged on device and pushed over 4G, NB-IoT or LoRaWAN to the cloud dashboard with SMS and app alerting, and firmware updates over the air. In practice it catches the insulation degradation and the loose termination before either becomes a fire.
A: Yes. Wireless RF 433 / 868 MHz interconnect links up to 40 devices across open-plan and multi-storey layouts, 10-year sealed lithium alarms remove the annual battery visit, and NB-IoT or LoRaWAN telemetry variants report status and faults without any local cabling. Where a wired loop is viable, the 860 panel's automatic mapping keeps the commissioning window short.
A: Sample cartons typically ship within 10-15 days and production project batches 28-35 days after approval. The A119-YW line carries a 3-year limited warranty on detectors, panels and signalling devices (2-year on instrumentation), a 12-month warranty on battery packs, 30-day DOA replacement, and a five-year spare-parts window with a documented obsolescence path for tenders that require a long service-life commitment in United Arab Emirates.
A: Yes. We are a source factory supporting cross-border traders and import agents with EXW, FOB, CIF and DDP export terms, T/T and L/C payment handling, HS 8531 classification support, consolidated CE, UKCA, RoHS, REACH, FCC and EN 54 documentation, neutral or custom packaging, localized manuals, low MOQ sample-carton orders and volume-based partnership pricing. Wanlin is recruiting global local partners, export trading companies and sourcing agents in United Arab Emirates, and exclusive-territory discussions are open through the export desk.
A: The 860 panel exports its event log, the 705 monitor exports per-circuit history, and the detector test and assessment kit tags each device by NFC or RFID and generates the site-specific pass/fail report automatically — device ID, timestamp, stimulus channel and result per detector. The report exports by USB or cloud, so the facility manager receives it before the crew leaves site, and the test aerosol is non-flammable, HFC-free and residue-free with the safety data sheet in the shipment file.
For wholesale pricing, sample carton requests, CE, UKCA, RoHS, REACH, FCC and EN 54 documentation, NIST-traceable calibration records, BS 5839-1 / NFPA 72 / AS 1851 reference packs, OEM and private-label customization, spares and consumables programs, and partnership discussions in Ras Al Khaimah and United Arab Emirates: