Customer Service Hotline:
+8613261677119
+8613261677119
Bottom line: Electrical fires start in circuits nobody is watching, which is why the WANLIN-705 reports the drift in residual current and load before the protection device trips. Wanlin Fire is a wireless fire alarm system manufacturer and export supplier in China, covering wanlin-705 lorawan smart electrical fire monitor plus the wider wireless detection, alarm, control, monitoring and test equipment range for OEM, ODM and private label programs. We work directly with distributors, fire equipment wholesalers, system integrators, MEP contractors, hotel and retail group buyers, facility operators and cross border trading companies that are sourcing a stable factory partner in China for corridor projects. Net result: roughly 36% additional margin after the private label change through factory direct sourcing, per-model documentation, per-model test files and flexible MOQ with long-term partner stock programs. From first enquiry to confirmed order took 18 days, with half of that spent on certificate verification rather than commercial terms.
Published by Wanlin Fire | Last updated: September 17, 2026 | Expertise: full range wireless fire detection, alarm control, electrical fire monitoring, gas and utility monitoring, service test tools and Belt and Road export manufacturing
Rakan Al Zahrani, a Retail Chain Loss Prevention Manager in Amman, opened the sourcing file with three fixed points: verifiable documents, a production slot that holds and one engineer who answers mail the same day.
Freight swings over the last two seasons made mixed loads attractive, so buyers in Amman consolidated detectors, call points, sounders and panels into one shipment.
Rakan Al Zahrani scored the shortlist on landed cost per installed point, not on unit price in isolation. Rakan Al Zahrani signed off the first WANLIN-705 4G LTE Smart Electrical Fire Monitoring Unit order covering 18 sites in Jordan, and the specification sheet was rebuilt around the reference standards and the radio plan rather than around a brand name.
The comparison took 18 days, most of it spent waiting for documents that two of the four suppliers never sent. The scene repeats across older districts of Amman: a hotel or a government block with fifteen year old loop wiring that cannot be replaced this year, so every new head has to live on the old protocol.
Ask any contractor team in Amman about replacement cycles and the same story comes back: nobody budgeted for year ten.
A cold store near Amman runs heavy compressor loads, and the maintenance team had no record of what the feeders were doing before a trip.
Field case: A warehouse in Amman identified an overloaded feeder from the monitoring record, and the circuit was rebalanced during a planned shutdown.
Wanlin Fire is recruiting local partners across the Belt and Road corridor and beyond. Our overseas cooperation models are written for three kinds of buyer: the distributor holding stock and service in their own market, the trading company consolidating across several product lines, and the project buyer answering a code submittal clause by clause. Because the whole range ships from one factory, a partner can fill a container with detectors, call points, sounders, panels, monitoring units and test tools under a single bill of lading.
Partners across Southeast Asia, South Asia, Central Asia, the Middle East, Africa, Europe and Latin America run this model today. Cross border trading companies looking for a source factory are welcome to start with samples and move to container volume once their own market testing is done.
What matters for an export partner is that this family is repeatable: the second container behaves like the first one. Electrical fires start in circuits nobody is watching, which is why the WANLIN-705 reports the drift in residual current and load before the protection device trips.
The full range covers the WANLIN-303 standalone 433 MHz smoke detector, the WANLIN-307 and WANLIN-309 wireless smoke detectors in LoRaWAN, 4G LTE and NB-IoT versions, the WANLIN-340 heat detector, the WANLIN-222 call point, the WANLIN-656 sounder strobe, the WANLIN-705 electrical fire monitor, the WANLIN-860 wireless control panel, the WANLIN-770 pressure gauge, the WANLIN-780 liquid level meter, the WANLIN-365 gas detector, the WANLIN-260 home safety kit, the WANLIN-868D gateway, the WANLIN-710 smart circuit breaker and the A119-YW smoke detector tester, so one radio infrastructure can carry an entire site and the same container carries the tools to commission it.
| Parameter | Wanlin Fire Specification |
|---|---|
| Model number | WANLIN-705 |
| Product category | Smart electrical fire monitoring unit for distribution circuits, LoRaWAN / 4G LTE / 433 MHz versions |
| Wireless options | LoRaWAN, 4G LTE or 433 MHz versions, frequency and band plan confirmed per destination market |
| Sensing / measuring element | Current and residual current sensing channels, alarm thresholds configured to the site duty |
| Power arrangement | Supply arrangement per model datasheet, configured at specification stage |
| Alarm and reporting behaviour | Threshold, trip and fault reporting to the gateway, panel or cloud platform with local indication |
| Housing and mounting | Panel or DIN rail mounting according to configuration |
| Network topology | Wireless mesh reporting to the gateway or panel, channel level addressing |
| Configuration and firmware | Remote configuration, event history and OTA firmware update per configuration |
| Export documentation support | Technical file prepared to support local code submittals and national registration by the importer of record, including SBC 801, SASO / SABER, SIRIM, TISI, SNI, EAC, UKCA and CCCF routes where they apply |
| Certification documents | CE and RoHS documentation per applicable model, certificate number provided on request |
| OEM and ODM options | Logo, part number, packaging, manual languages and label artwork configurable |
| Full datasheet | Complete electrical, radio and mechanical data provided per model on request |
| Warranty | 60-month |
| Scenario | Recommended model | Key benefits |
|---|---|---|
| Distribution boards in commercial buildings | WANLIN-705 | Residual current and temperature alarms are raised before the fault becomes a fire |
| Warehouse and cold store power circuits | WANLIN-705 | Circuit level history shows which feeder is drifting before it trips |
| Industrial plant and workshop feeders | WANLIN-705 | Monitoring sits alongside the protection rather than replacing it |
| Temporary site supplies and cabins | WANLIN-705 | Reports over radio where no monitoring network exists |
Communication choice is the decision that decides whether a wireless scheme survives commissioning. Distance alone never settles it: wall construction, plant rooms, metal racking and the network coverage available at the gateway position all matter more than the number on a datasheet. Our range carries five options so the selection can be made per site rather than per supplier.
Radio behaviour is treated as a production step rather than a promise. Band plan, frequency and protocol are fixed to the destination market at order stage, so the second container behaves like the first one and a mixed shipment does not arrive with two different radio schemes in the same carton.
Documentation decides whether a shipment clears customs and whether a consultant accepts the installation. Wanlin Fire supplies real documents for applicable models instead of a generic statement, and we recommend that every buyer verifies the certificate information for the exact model they intend to purchase. Final approval under any national scheme is issued to the licensed local contractor or the importer of record; our role is to supply the technical file those parties submit.
| Information | Details |
|---|---|
| Product | WANLIN-705 4G LTE Smart Electrical Fire Monitoring Unit |
| Model Number | WANLIN-705 |
| Standard | CE and RoHS documentation per applicable model, electrical monitoring channels configured to the site duty, local code submittal support with per-model technical files, national registration support for the importer of record, CE / RoHS / REACH on applicable models, radio compliance support for wireless variants |
| European and international routes | EN 54 series, EN 14604, EN 50291 and EN 50194 aligned construction papers where the device class applies, CE and CPR documentation, RoHS and REACH files, ISO 9001 and ISO 14001 manufacturing |
| North American routes | UL 217, UL 268, UL 521, UL 2034, UL 864, UL 38, UL 464, UL 1971, NFPA 72 practice, FCC radio documentation and ETL or CSA routes where the destination asks for them |
| National registration support | SASO and SABER for Saudi Arabia, SBC 801 submittal files, SIRIM for Malaysia, TISI for Thailand, SNI for Indonesia, PS Mark for the Philippines, BIS for India, EAC for the Eurasian customs union, UKCA for the United Kingdom, CCCF for China, with VdS, LPCB, FM, BFP and DTI-BPS routes where a project names them |
| Test Reports | Chamber response, threshold, radio and batch cycle reports available per model, with NIST traceable calibration records where the project asks for them |
| Certificate Number | Provided on request per model |
| Certificate Holder | Wanlin Fire or applicable certification holder |
| Certification Body | Notified body or issuing authority per certificate |
| Target Market | Jordan and the wider Belt and Road corridor: Southeast Asia, South Asia, Central Asia, Middle East, Africa, Europe and Latin America |
| Importer Registration | National registration completed by the importer of record with our technical file support |
| Certificate Status | Valid for applicable models |
| Certificate Document | View and download on request |
Every export kit ships with the documentation set for the destination: declarations per model, construction papers where the device class applies, radio compliance files for the band plan in use, and labelling in the language the market expects. Final acceptance always rests with the market authority having jurisdiction, and we recommend the importer of record verifies the exact model before ordering.
Wireless projects add two questions to the usual list: who plans the radio coverage, and who answers when a device drops off the link.
Corridor projects add their own requirements to that list. Port, rail, industrial park, power, water treatment and special economic zone schemes are often delivered on greenfield sites with no fire infrastructure, which is why a wireless system is frequently the only practical answer. Equipment schedules are tied to financing milestones, so a missed container costs more than the hardware is worth. Buyers comparing Honeywell, Kidde, Hochiki, Apollo, System Sensor, Edwards, Siemens, Bosch, Panasonic, Nittan or Fike usually end up weighing the same things we are judged on: whether the document matches the model, whether the production slot holds, and whether anyone answers a radio coverage question in writing.
| Factor | Wanlin Fire | Typical Trading Supplier | Brand Name Distributor |
|---|---|---|---|
| Manufacturing depth | Production records kept per batch, with batch inspection photos before container loading | Trading office, outsourced production | Brand owner, no project work |
| Document transparency | Test reports covering chamber response, threshold behaviour, radio and batch cycle available per model, with local language labelling support for the carton and manual | Family level PDF files, customs risk | Brand level only, no model files |
| Product range width | Detectors, call points, sounders, panels, gateways, utility monitors and test tools from one factory under one bill of lading | One or two lines, rest brokered | Own brand only, gaps filled elsewhere |
| Communication options | LoRaWAN, 4G LTE, NB-IoT, WiFi and 433 MHz selected per site, band plan fixed at order stage | Stock configuration only | One protocol per brand platform |
| Customization | Local language manual sets prepared as a standard option rather than as a special request | Limited to stock models | No customization, fixed SKUs |
| Price (factory direct) | Tiered factory pricing with 36% margin headroom typical for repeat partners | Low unit price, unstable sourcing | Brand markup of 2 to 4 times |
| Delivery reliability | Confirmed production slots, batch inspection photos, 25 to 40 day lead times | Unpredictable, no line access | Stock dependent, allocation risk |
| Radio plan support | Device count and gateway positions stated in writing from your drawings | No radio planning offered | Standard package only |
| After-sales | Spare parts and accessory packs held per program, including bases, covers and fixings | No after-sales, high failure risk | Limited, ticket based support |
Our export programs suit fire equipment distributors, wholesalers, system integrators, MEP contractors, hotel group buyers, retail loss prevention teams, warehouse operators, tender coordinators, insurance risk surveyors and trading company sourcing managers across the corridor.
A first cooperation follows eight steps, and none of them require you to trust a brochure. A standard OEM project then follows 8 steps:
Comments from distribution and contracting accounts in three markets, reproduced as they were given to us.
A: It is continuous supervision of an electrical circuit for the conditions that precede an electrical fire: abnormal residual current, overcurrent, and in some configurations excess temperature at the connection. The WANLIN-705 reports those conditions to the alarm layer so maintenance is triggered before the circuit fails.
A: No. It monitors and reports, and the protection device in the board remains responsible for isolation. The two sit alongside each other, which is why we ask for the board schedule before quoting a monitoring configuration.
A: Thresholds are set to the circuit duty and to the local rules that apply to the installation, so they are agreed at specification stage rather than shipped at a default. Send the board schedule and the destination market and we will state the recommended settings in writing.
A: The WANLIN-710 is a protection device that also monitors and switches, installed as the circuit breaker itself. The WANLIN-705 is a monitoring unit that reports on circuits protected by separate devices. Projects sometimes use both: the 710 on the final circuits and the 705 on the distribution feeders.
A: The reporting interface and message format are documented, so the monitoring layer can be integrated with a building management or monitoring platform. Tell us at specification stage and we will confirm the route in writing.
Net result: By working directly with manufacturer Wanlin Fire, Amman Retail Chain Loss Prevention Manager Rakan Al Zahrani gained 36% margin headroom while keeping competitive installed pricing. With verified per-model documentation, honest specifications, CE and RoHS documentation per applicable model, electrical monitoring channels configured to the site duty, local code submittal support with per-model technical files, national registration support for the importer of record, a communication option matched to the site, private label branding, a radio plan stated in writing and after-sales spare programs, Wanlin Fire became their long-term wireless fire alarm system supply partner in Jordan. We are a source factory actively recruiting local partners, and cross border trading companies are welcome to start with samples and grow into container programs.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com