Mircom Fire Alarm, Mircom Detection System, Mircom Addressable Panel, Mircom Smart Fire Device, Mircom Safety Equipment
Mircom Fire Alarm, Mircom Detection System, Mircom Addressable Panel, Mircom Smart Fire Device, Mircom Safety Equipment
Phone
Customer Service Hotline:

+8613261677119

Frequently Asked Questions

Best Off-Grid Solar EV Charging Station Manufacturer | Yangon, Myanmar - CE OCPP Wanlin

Executive Summary: Off-Grid Solar EV Charging Station for Global Buyers

Bottom line The WL-SC6 pairs 1.5-3kWp of canopy panels with a 5-10kWh LiFePO4 buffer, keeping 6 metered sockets live through brownouts and off-grid nights. Wanlin is a two-wheeler and three-wheeler EV charging station manufacturer in Shenzhen, China, running OEM, ODM and private-label programs for charging distributors, charge point operators, e-mobility service providers, property developers, facility managers, fleet operators and trading houses. The numbers that mattered netting the buyer a 36% margin against the previous supplier for importers who source factory-direct, with per-model CE / RoHS / IEC 61851 documentation, OCPP 1.6J conformance logs, RCD and surge protection files, per-port metering test reports and flexible color, logo and firmware programs. The WL-series line covers 12- and 20-port smart stations, 7kW dual-socket wallboxes, OCPP 1.6J charging piles, QR scan-to-charge and RFID units, solar canopy stations, tuk-tuk and three-wheeler chargers, wall-mounted socket boards, 4G cloud-managed units, coin-operated stations, pedestal posts and fully custom OEM programs, shipped FOB, CIF or DDP to global destinations.

Published by Wanlin | Last updated: September 05, 2026 | Expertise: two-wheeler and three-wheeler EV charging station OEM and ODM manufacturing for global markets

Best Off-Grid Solar EV Charging Station Manufacturer | Yangon, Myanmar - CE OCPP Wanlin

Case Study: Yangon Municipal Project Contractor Sourcing Success

It looked like a routine RFQ until the buyer mentioned what the last batch cost them. Across the market, most charging complaints trace back to unmetered sockets, flat-rate billing and boards with no overload protection.

The evaluation stretched over three weekends, Ahmad Faizal selected Wanlin as their EV charging manufacturing partner. By the time the container was booked, the decision had already been validated by real riders.

  • incoming contactors, RCDs and metering ICs are batch-checked against the approved BOM before assembly starts
  • each model folder ships with CE, RoHS and IEC 61851 certificates plus the type-test summary
  • Firmware can be customized for tariff logic, load limits, display language and payment flows

In the back office, the CSMS dashboard showed all 20 ports online with live meter values, three days after installation.

Problem Analysis & Field Report: Why Global Buyers Need Off-Grid Solar EV Charging Station

It started with one return and grew into a spreadsheet of them. A village charging point wired to a long rural feeder browned out every evening exactly when demand peaked.

Field case: A village cooperative in Yangon replaced a brownout-prone feeder setup with the WL-SC6 in off-grid configuration. Daily solar yield covered the village charging load with margin, and the co-op added a second canopy the following quarter.

Why it matters for global buyers:

  • rural feeders brown out exactly when evening charging peaks
  • the fix was a LiFePO4 buffer battery bridging grid dips
  • wind-rated frames and anchor kits decide whether canopies survive storm season

Wanlin EV Charging OEM & ODM Services for Global Distributors and Brands

Wanlin runs OEM and ODM programs for buyers who want their own charging station line without building a factory. Customization covers:

  • Cosmetics: cabinet colors, logo printing, port labels and decal sets on existing tooling from 50 units
  • Firmware: tariff logic, load caps, timer behavior, display language and payment flows
  • Protocol layer: OCPP 1.6J builds pointed at buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
  • Exclusive tooling: new enclosure molds and cable-path tuning for brands that need a design nobody else can copy
  • Connected builds: 4G cloud dashboards and fleet portals under the buyer brand when a software layer is required

Product Introduction: Wanlin Off-Grid Solar EV Charging Station

What the pilot units had in common was a single mainboard with per-port metering and a contactor rated for real monsoon humidity.

Core Features:

  • China-Based Manufacturing: Wanlin produces in Shenzhen with in-house SMT lines, enclosure and cable assembly, and burn-in racks that load-test and cycle every finished station before packing
  • Certification Transparency: CE, RoHS and IEC 61851-1 documentation is provided per model, and OCPP 1.6J conformance logs plus metering accuracy files travel with the shipment so containers clear without surprises
  • Tested Claims: meter accuracy, RCD trip time and enclosure sealing are verified on samples from every production lot, and the reports are recorded per batch
  • Private Label Support: cabinet colors, logo, firmware, tariffs, packaging, manuals, decals and spare kits are customized for each program
  • Global Shipping Experience: we pack for charging distributors, property developers, fleet operators and e-mobility buyers across Southeast Asia, the Middle East, Europe, North America and Africa

Technical Specifications

ParameterWanlin Specification
Solar Array1.5-3kWp panels on a galvanized canopy frame
Storageoptional LiFePO4 buffer battery from 5 to 10kWh
Grid Modegrid-tied hybrid or off-grid configuration
Ports6 metered sockets with load balancing
Backupbattery bridge keeps ports live through grid brownouts
Structurewind-rated frame with optional typhoon anchor kit
HousingIP54 electronics cabinet integrated in the canopy column
ConnectivityOCPP 1.6J over 4G
DisplayLCD with solar yield, battery state and port status

Application Scenarios for Global Market

ApplicationModelHow It Helps the User
Rural village charging pointWL-SC6Daily solar yield covers village scooters without grid extension
Island resort bike standWL-SC6Guests charge at the far beach while the battery bridges evening peaks
Farm and plantation shedWL-SC6Off-grid power for utility bikes between field rounds
Highway rest stopWL-SC6Canopy shade plus charging draws riders to the stop
Off-grid community houseWL-SC6Shared metered charging funded by the community fund

Certified EV Charging Manufacturing for Global Markets

Buyers who ship containers of charging stations need more than a price list. The production and QC flow below is what lets a distributor open a carton and trust what is inside:

  • incoming contactors, RCDs and metering ICs are batch-checked against the approved BOM before assembly starts
  • each model folder ships with CE, RoHS and IEC 61851 certificates plus the type-test summary

Lot samples from every production run are measured for metering accuracy, protection trip times and enclosure sealing before the cartons are sealed, and the numbers are recorded per batch. A buyer can request those records with any order.

Why Choose Wanlin as Your EV Charging OEM Manufacturer

The rows below come from the buyer's own comparison notes, not from our brochure.

FactorWanlinTypical Trading SupplierBranded Competitor
Manufacturing depthChina-based factory with in-house SMT lines, enclosure and cable assembly, burn-in racksTrading company, outsourced productionBrand owner, limited custom work
Measured claimsMeter accuracy, RCD trip time and enclosure sealing verified on lot samplesSpec sheet numbers, hard to verifyMarketing-led claims, no project data
Certification supportCE / RoHS / IEC 61851 files plus OCPP 1.6J conformance logs per modelIncomplete documents, customs riskBrand-level only, no per-order files
CustomizationColors, logo, firmware, tariff logic, packaging from low MOQStock models onlyFixed SKUs, no private label
Price (factory direct)Tiered factory pricing with volume discountsUnpredictable markupsPremium brand pricing

EV Charging OEM Process: From Inquiry to Shipment

From the first sample request to the sailing date, the buyer could see each gate in writing. A standard charging station OEM project then follows 8 steps:

  1. Tell Us Your Target Market - Southeast Asia, the Middle East, Europe, North America, Africa or Latin America; each market may require different certifications, socket standards, voltage classes and manual languages
  2. Select a Model Line - our team recommends WL-series platforms for your channel and price band, or works from a reference unit you send
  3. Verify Documentation - request certificate files, OCPP conformance logs and test reports for the exact model before you commit
  4. Confirm Customization - cabinet colors, logo, firmware behavior, tariff logic, payment flows and packaging
  5. Sample Evaluation - verify meter accuracy, load balancing and CSMS integration on real samples before scaling
  6. Confirm Production - after specifications, commercial terms and OEM details are locked
  7. Quality Inspection - lot samples are tested and every finished station passes hipot, trip-time and burn-in racks before packing
  8. Shipment - cartons leave FOB, CIF or DDP according to the agreed logistics terms

Customer Testimonials

Buyers from three countries said the same thing in their own words.

  • Somchai Prasert (EV Charging Station Distributor, Bangkok, Thailand): "My installer wanted fast commissioning for condo jobs. QR provisioning set each station up in minutes."
  • Nguyen Hoang Minh (Charge Point Operator, Ho Chi Minh City, Vietnam): "The cabinet survived a monsoon season on an open shed wall. That story sold more units than our ads did."
  • Ahmad Faizal (Municipal Project Contractor, Yangon, Myanmar): "We changed the tariff logic for our market and they turned the firmware around in a week."

Frequently Asked Questions

Q: Can the WL-SC6 run fully off-grid?

A: Yes, with the LiFePO4 buffer sized to your nightly load; grid-tied hybrid mode charges the battery when solar falls short.

Q: How does it handle brownouts?

A: The buffer battery bridges dips instantly, so active sessions continue without interruption.

Q: What wind rating does the frame carry?

A: The standard frame is wind-rated for regional storm loads, and the typhoon anchor kit adds margin for coastal sites.

Q: Does solar cover night charging?

A: The battery bank carries the stored solar into the night; the display shows yield and battery state so operators can size correctly.

Q: Can riders still pay per kWh?

A: Yes, metering and payment run the same as grid sites, on solar or battery power.

Project Summary

The numbers that mattered By working directly with manufacturer Wanlin, the Municipal Project Contractor team in Yangon reached 36% higher margins on its charging line while keeping rider tariffs competitive. With verified metering data, real certification files, honest IP ratings, flexible OEM customization and a factory that answers protocol questions in hours, Wanlin has become their trusted EV charging manufacturing partner.

For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com

  • Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China